[Specialty Brake and Clutch]



Brake & Clutch Materials

Non Asbestos Woven Friction Products

Normal C.O.F. - .40 @ 350'F @ 50 P.S.I.

Type of Service         Max. Pressure          Max. Drum Temp.
Dry/Oil              100 P.S.I.                500'F 
___________________________________________________________________

ROLL SIZES AVAILABLE
width in inches

Thickness    1    1.5    2    2.5    3    4    5    6    8    13   
            _______________________________________________________

  1/8        X     X     X     X     X    X    X    X    X     X   
  3/16       X     X     X     X     X    X    X    X    X     X   
  1/4        X     X     X     X     X    X    X    X    X     X   
  5/16       X     X     X     X     X    X    X    X    X     X   
  3/8                    X     X     X    X    X    X    X     X   
  1/2                    X     X     X    X    X    X    X     X   
  5/8                                X    X    X    X    X     X   
  3/4                                X    X    X    X    X     X   
___________________________________________________________________
_____________X=available___________________________________________
[Horizontal Rule]

Non Asbestos Flexible Molded Roll Lining

For internal or external applications.
Can be shaped to large or small drum diameters.
Sets fast, engages smoothly and has good wear factor.
Can be used where molded blocks are not available. 
_____________________________________________________________________

width in inches

Thickness   1    1.5    2    2.5    3    4    5    6    7    10    12
            _________________________________________________________

  1/8       X     X     X     X     X    X    X    X    X     X     X
  5/32      X     X     X     X     X    X    X    X    X     X     X
  3/16      X     X     X     X     X    X    X    X    X     X     X
  1/4       X     X     X     X     X    X    X    X    X     X     X
  5/16      X     X     X     X     X    X    X    X    X     X     X
  3/8       X     X     X     X     X    X    X    X    X     X     X
_____________________________________________________________________
____________X=available______________________________________________
[Horizontal Rule]

Non Asbestos Molded Flat Sheets


thickness

                  1/8    3/16    1/4     5/16    3/8    1/2
                  ___________________________________________

 NA336 (.38 COF)   X      X       X       X       X      X
_____________________________________________________________
_________________________X=available_________________________
SHEET SIZE 30" X 30"

[Horizontal Rule]

We are also your single source for all friction material requirements.
All our products are non asbestos.
Also special molded products are available.

Check out our Bonding & Industrial Applications for more information.

[Specialty Brake and Clutch]

Website at: http://www.clutchshop.com/
Telephone:(519)726-4514 -- 24 Hour Toll Free Fax:(888)892-5668
North American Toll Free: 1-800-265-5159
E-mail: sbc@wincom.net

[Horizontal Rule]

[Homepage] [Products] [Send E-mail]

Specialist in Clutch & Brakes for anything that moves
or stops anywhere.